Kyoritsu KEW 1062 Digital Multimeter

High Accuracy, High Performance and Reliable Measurements • 0.02% basic DC accuracy • Large display with 50, 000 counts • Dual display for double indication for AC and DC, V and Hz, etc. • True-RMS Measurements AC and AC+ DC • Wide AC Frequency bandwidth from 10Hz to 100kHz * • True-RMS or MEAN value detection mode can be selected * • Fast Peak Hold response time of 250µ s • Low-pass filter for motor drive measurements * • Low Power © for resistance measurements on sensible electronic circuits by a low and safe test current * • User calibration function * Only for KEW 1062 Safety design for industrial use • Complies with IEC 61010-1 CAT.III 1000V, CAT.IV 600V • Terminal shutter to prevent incorrect test leads' insertion in current terminals • Very wide operating temperature range from -20 to 55º C Reliable support for data management • Large data internal memory • KEW 1062: 10, 000 data ( logging) , 100 data ( manual) • Download data and Live Monitoring on a PC via the USB interface ( Option for USB Communication set) Specifications Detection mode: MEAN/ RMS ( switch) DC V: 50.000/ 500.00/ 2400.0mV/ 5.0000/ 50.000/ 500.00/ 1000.0V ( Input impedance: Approx. 100M© [ 50/ 500/ 2400mV] , 10M© [ 5/ 50/ 500/ 1000V] ) | ± 0.02% rdg± 2dgt ( Basic accuracy) AC V [ RMS] : 50.000/ 500.00mV/ 5.0000/ 50.000/ 500.00/ 1000.0V ( Input impedance: 11M© < 50pF [ 50/ 500mV/ 5V] , 10M© < 50pF [ 50/ 500/ 1000V] ) ± 0.4% rdg± 30dgt ( Basic accuracy) AC V [ MEAN] * : 50.000/ 500.00mV/ 5.0000/ 50.000/ 500.00/ 1000.0V ( Input impedance: 11M© < 50pF [ 50/ 500mV/ 5V] , 10M© < 50pF [ 50/ 500/ 1000V] ) | ± 1% rdg± 30dgt ( Basic accuracy) DCV+ ACV: 5.0000/ 50.000/ 500.00/ 1000.0V ( Input impedance: 11M© < 50pF [ 5V] , 10M© < 50pF [ 50/ 500/ 1000V] ) ± 0.5% rdg± 10dgt ( Basic accuracy) DC A: 500.00/ 5000.0µ A/ 50.000/ 500.00mA/ 5.0000/ 10.000A, | ± 0.2% rdg± 5dgt ( Basic accuracy) AC A [ RMS] : 500.00/ 5000.0µ A/ 50.000/ 500.00mA/ 5.0000/ 10.000A, ± 0.75% rdg± 20dgt| ( Basic accuracy) AC A [ MEAN] * : 500.00/ 5000.0µ A/ 50.000/ 500.00mA/ 5.0000/ 10.000A | ± 1.5% rdg± 20dgt ( Basic accuracy) DCA+ ACA: 500.00/ 5000.0µ A/ 50.000/ 500.00mA/ 5.0000/ 10.000A , ± 1% rdg± 10dgt ( Basic accuracy) © : 500.00© / 5.0000/ 50.000/ 500.00k© / 5.0000/ 50.000M© , ± 0.05% rdg± 2dgt ( Basic accuracy) LowPower-© * : 5.000/ 50.00/ 500.0k© / 5.000M © , | ± 0.2% rdg± 3dgt ( Basic accuracy) Continuity buzzer: 500.0© ( The buzzer turns on for resistances lower than 100± 50© ) Diode test: 2.4000V| ± 1% rdg± 2dgt Open curcuit voltage: < 5V ( Approx. 0.5mA Measuring Current) Capacitance: 5.000/ 50.00/ 500.0nF/ 5.000/ 50.00/ 500.0µ F/ 5.000/ 50.00mF, | ± 1% rdg± 5dgt ( Basic accuracy) Frequency: 2.000~ 9.999/ 9.00~ 99.99/ 90.0~ 999.9Hz/ 0.900~ 9.999/ 9.00~ 99.99kHz, | ± 0.02% rdg± 1dgt ( Basic accuracy) DUTY: 10~ 90% | ± 1% rdg Temperature: -200~ 1372º C| ± 1% rdg± 1.5º C, -328~ 2501.6º F| ± 1% rdg± 2.0º F ( with the use of K-type Temperature probe) Measurement functions: DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature, Capacitor, Duty cycle ratio, Decibel ( dBV, dBm) , Continuity Check, Diode Test, LowPower-© * Other functions: Data Hold ( D/ H) , Auto Hold ( A/ H) , Peak Hold * ( P/ H) , Range Hold ( R/ H) , Maximum value ( MAX) , Minimum value ( MIN) , Average value ( AVG) , Zero Adjustment ( Capacitor, Resistance) , Relative values, Save to Memory, LCD backlight Withstand voltage: 6, 880V/ 5 sec. Applicable standards: IEC 61010-1 CAT.IV 600V, CAT.III 1000V Pollution degree 2, IEC 61010-031, IEC 61326-1 ( EMC) Power source: R6P ( 1.5V) × 4 ( Auto power off: approx. 20 minutes) Dimensions: 192( L) × 90( W) × 49( D) mm Weight: Approx. 560g ( including batteries) Accessories: 7220A ( Test leads) , R6P× 4, Instruction manual, 8926 ( Fuse [ 440mA/ 1000V] ) × 1 ( included) 8927 ( Fuse [ 10A/ 1000V] ) × 1 ( included) * Only for KEW 1062