ATTEN AT-H501 Handheld Scope Meter

Introduction AT-H501 Five-in-One Handheld Tester 25MHz digital storage oscilloscope. 6 1/ 2 Auto-range digital multimeter DDS function generator: : 10Hz~ 156kHz Frequency/ duty ratio test: 60MHz 156kHz auto-range inductance test Capacitance measurement range up to 66000uF 60Mohm resistance test ( LCR) Remote constrol/ crystal oscillator test Summary AT-H510 is unique all-in – one multifunction test instrument comprise of 25MHz Single Channel Oscilloscope, 6000 count high precision Digital Multimeter, Function Generator, 60Mohm LCR Meter and frequency counter.It has a large 3.8’ ’ .320* 240 pixels LCD High Density Back-Lit Graphical display.Convenient and agile auto measure functions, with all measurement parameters adjustable. In multimeter mode, both alternative current and voltage can be tested with one single probe input.No need to change probes.One single key-press can directly show the waveform of the signal.Capacitance measurement range up to 66000ug, and the measurement takes only a few seconds.Function signal output available, ranging from 10Hz to 156kHz.Real-time waveform is displayed simultaneously.Interturn short-circuit test available.High frequency test designed for small inductance. It’ s a compact and hand held size with re-chargeable battery makes it your ideal companion for the ideal for on-field operation.Measuring and testing just became easier and more affordable than ever. Features Panel calibration technology. Calibrated data were stored in the memory, providing more accurate outcome. Alternative voltage bandwidth up to 20kHz Max voltage range: 2000V.waveform can be viewed simultaneously using key press Peak-detect and peak hold function in voltage measurement, The max value, min value and current value are showed in the same screen. Oscilloscope mode can measure parameters include Vp-p, + Vp.Hz, T, DV, Dt DSO features: Auto measurement, auto display and auto zero calibration, Save/ recall, can store upto 40 waveforms Multimeter: 200DMM data; up to 200groups of data can be automatically recored.Convenient for IC in-circuit test. Function generator can generate Sine, Triangle, Sawtooth and Square wave 200us/ 400us square wave can be utilized to test the ringing signal of interturn short-circuit. Display: 3.8” , 320* 240, LED back-lit, contrast adjustable Built-in 1600mAh Ni-MH rechargeable battery and AC charger USB interface and upper-computer software provided Battery life: 5-6 hours External 10/ 1A switching power supply Specification Digital Storage Oscilloscope Sampling rate: 100M sample/ Sec( Single Ch) Bandwidth: DC~ 25MHz( X10 Probe) DC~ 6MHz( X1 Probe) Mode: Nomal, TV, Single Trig, Norm-Amplitude/ Time Base, TV-TV-V, Sync Input: DC, AC Input Impedande: 1Mohm/ 20pF Probe: X, X10 Probe Select: X, X10, X100 Max Input Volt: 300V p-p A/ D Converter: 8-bit Readout: Positive Peak, Negative Peak, Peak-Peak, Frequency, Duty Cycle, True RMS Vertical sensitivity: 20mV/ div to 500V/ div in 1.2.5 Steps Sweep rate: 10ns/ div to 1s/ div Waveform Interpolation: ( Sinx) / x Waveform storage: 40sets Graphical Digital Multimeter & LCR Maximum Counts: 6600 counts Auto Range AC/ DCV: 6V/ 60V/ 600V Manual range AC/ DCV: 600mV/ 6V/ 60V/ 600V Frequency response: 40Hz to 50kHz( 6V to 100V) Auto Range AC/ DCA: 60mA/ 600mA and 10A( with Adaptor) Frequency Response: 40Hz to 5kHz Graphical DMM Mode ACV: 40Hz to 50kHz( Auto Range) ACA: 40Hz to 20kHz Resistance: 600/ 6k/ 60k/ 600k/ 6M/ 60Mohm Capacitance: 6n/ 60n/ 600n/ 6u/ 60u/ 600u/ 6m/ 60mF Capacitance: < 1.2 Sec( @ 6000uF) Inductance: 10u/ 100u/ 1m/ 10m/ 100m/ 2H Resolution: 0.1uH Frequency: 10Hz to 60MHz( 500V rms) Duty Cycle: 10% to 94.9% Optional Accessories Cell phone service accessories( including 2.4G frequency counter, power supply, etc.Signal field intensity test and other tests can be performed.) Household appliances service accessories( color TV signal generator and color display signal generator) High voltage/ big current test accessories( High voltage probe, clamp)