ATTEN ADS-H102 Handheld Scope Meter

Introduction _ Two channels, bandwidth25M ~ 200M, real time sample rate 250MSa / s ~ 1GSa / s.? _ Immediate trigger and test function? _ Elaborate window design, enabling accurate analysis of the details and overview forwaveforms? _ Automatic measurement of 16 types of waveforms and parameters? _ Cursor measurement? _ Built-in FFT function ( spectrum analysis) ? _ Industrial buses: RS232, RS484, I2C, SPI? _ Math operation: + , -, * , / ; ? _ Trigger types: edge, video, pulse width and bus trigger.? _ Save/ recall function for reference waveform.? _ Unique waveform recording, storage and replay function.? _ Powerful file management? _ Multimeterfunctions: voltage, resistance, continuity buzzer, diode, capacitance, temperature, current? _ Othermultimeter functions: relative measurement, reading hold, maximum and minimum, Pass/ Fail, cursor measurement, data loggers, ? _ Built-in FLASH memory disk: can be used as a USB disk to share data between the instrument and PC.? _ High-resolution 5.6? color LCD display, optional resolution: 320 234 and 640 480? _ Firmware upgradeable? _ Multi-languages menu? _ Rechargeable lithium battery. Battery life: about 4 hours General Spec. Model No. ADS-H102 Bandwidth: 100MHz Rise Time: 16 average valve: ( 1 sampling interval time+ 50ppm reading+ 0.4ns) Vertical Vertical Sensitivity: 5mV/ div ~ 10V/ div Scan Range: 10s/ div ~ 5ns/ div10s/ div ~ 2ns/ div ( ADS-H202) Display Display type: 5.6 inch TFT LCD Display resolution: 320 234, 640X480 ( ADS-H202) Display color: 65536 color Waveform display area: 12 grids in horizontal, 25dot/ div; 8 grids in vertical, 25dot/ div Backlight: 300nit Language: Simplified Chinese, Chinese-traditional and English Digital Persistence: 250ms ~ 10s, infinite FFT:  Waveform Comparison:  Trigger Trigger Modes: Single, Auto Trigger Types: Edge, Video, Video Line, Pulse Width, Bus Interface, Slope DMM ( applicable when power supply from battery only) Counts: 4 ; 5 1/ 2 ( ADS-H202) Resistance measurement: 4K / 40K / 400K : ( 1.2% + 5 characters) ; 400 / 4M / 40M : ( 1.5% + 5 characters) DC voltage measurement: 400mV/ 4V/ 40V/ 400V/ 1000V: ( 1% + 5characters) AC voltage measurement ( 45Hz -400Hz) : 400mV/ 4V/ 40V/ 400V/ 700V: ( 1.2% + 5 characters) , frequency: < 200Hz: ( 1.5% + 5 characters) , frequency: < 200Hz DC voltage measurement: 400mA: ( 1.2% + 5 characters) 10A: ( 1.5% + 5 characters) AC voltage measurement( 45Hz -400Hz) ( external module) : 400mA: ( 2% + 5 characters) 6A: ( 2.5% + 5 characters) Capacitance measurement: 4mF: ( 5% + 10 characters) 40nF/ 400nF/ 4 F/ 40 F/ 400 F/ 4000uF: ( 4% + 5 characters) Temperature measurement: Centidegree: -50 C -1000 CDegree Fahrenheit: -58 -1832 On-off measurement: Yes Diode Measurement: Yes Data Logger: Yes Measurement mode: Automatic/ manual ( in current measurement, only manual measurement) Advanced Function: Relative Measurement, Auto Hold, Max / Min, Pass / Fail Interface function Standard configuration: 1USB SLAVE Standard fitting: USB data wire Power Supply voltage: 17.4V, 4400mAh lithium Battery00-240VACRMS, 45-440Hz, CAT II Power consumption: Less than 18VA Battery feed: ADS-H062/ ADS-H102: 4hADS-H202: 3h Conditions Temperature: Operating: 0 C to + 40 C Non-operating: 120 C to + 60 C Cooling method: Natural cooling Humidity: + 10 C to + 30 C: d95% 5% RH+ 30 C to + 40 C: d75% 5% RH Height: Operating: 3, 000mNon-operating: 15, 000 m Mechanical specifications Size: 266 180 55mm Weight Net weight: 1.2kg Gross weight: 1.6kg IP protection: IP2X Interface: RS232, RS485, I2C, SPI Calibration interval: one year ( recommended)