Back to Top

Hi, Guest!

  LOKASI :  Kota Tangerang Selatan

Bergabung Selama :

BAGIKAN :   

Bagikan :

Oscilloscope Analog ATTEN AT7328

Update Terakhir
:
02 / 12 / 2019
Min. Pembelian
:
0
Dilihat Sebanyak
:
41 kali

Harga

CALL
Bagikan
:

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.

Detail Oscilloscope Analog ATTEN AT7328

ATTEN AT7328 Analog Oscilloscope AT7328 Introduction: Features • CRT with Bright high accelerated pole voltage • This oscilloscope tube is of fast speed and high light.Votlage of accelerated pole up to 2kv, able to indicate clear traceseven under • High-speed sweep. • Two waveforms in different frequency can be observed via alternative trigger function. • TV signal synchronous function • Ch1 output • Z-axis input Function of bright adjustable can add frequency or time marker to oscilloscope, trace of positive signal blanking, TTLmatching. • X-Y operation This item can be used as an X-Y oscilloscope while setting in X-Y position, CH1 is horizontal axial and CH2 is vertical axial. Specifications 1) Vertical System Sensitivity 5mV~ 5V/ div, 10 steps in 1-2-5 sequence Sensitivity Accuracy d3% ( x5 MAG: d5% ) Vernier vertical Sensitivity To 1/ 2.5 or less of panel-indicated value Frequency Bandwidth DC~ 20MHz( x5 MAG: DC~ 7MHz) AC Coupling: 1000: 1 at 50kHz ; > 30: 1 at 20MHz 2) Vertical System CH1 Signal Output Min. 20mV/ DC ( 50© output bandwidth 50Hz~ 5MHz) CH2 INV BAL Balance variance ratiod1DIV 3) Triggering Triggering Soure CH1, CH2, LINE, EXT Coupling AC: 2MHz~ 20MHz: 1.5DIV Slope: + / - 4) Horizontal System Trigger signal Input Impedance Max Input Voltage: Approx 1M© / 25pF 300V( DC+ AC peak) AC not exceed 1KHz Sweep time: 0.2uSec 0.5Sec/ DIV, 20 steps in 1-2-5 sepuence Sweep time: Accuracy ± 3% Vernier sweep time control: d1/ 2.5 of panel-indicated value Sweep magnification: 10 times x10MAG Sweep time accuracy: ± 5% , ( 20nSec~ 50nSec are uncalibrated) Linearity ± 3% , x10MAG: ± 5% ( 20ns and 50ns are uncalibrated) Position by x10MAG Within 2DIV. at CRT screen center 5) X-Y Mode Sensibility Same as Vertical axis BandwidthDC~ 500KHz X-Y Phase difference= 3( within DC50kHz) 6) Z Axis Sensibility: 5Vp-p Bandwidth: DC~ 2MHz Input impedance: Apporx. 47k© Max input voltage: 30V 7) Calibration Signal Waveform: Squaer wave Frequency: Approx 1KHz Duty Ratio: 48: 52 Output voltage 2Vp-p± 2% Output impedance: Approx 1k© 8) CRT Type 6in, Rectangle, Inside graduaton Phosphor P31 Acceleration Voltage Approx 2kV 200MHz Effective Screen Size 8x10DIV( 1 DIV= 10mm( 0.39in) ) Graticule Internal Trace rotation provided 9) Power requirement Voltage: Fixed AC220V± 10% or 110/ 220V± 10% selectable Frequency: 50/ 60Hz Power conseumption: Approx.40VA, 35W( max) 10) Operating Ambient Indoor, 2000m elevation Ambient temperature: 10° C~ 35° C Max operating range: 0° C~ 40° C Humidity: 85% RH , dry Size: 310x150x455( mm) Weight: approx.8Kg Storage temperature: -10° C~ 70° C
Tampilkan Lebih Banyak